IMC Networks IE-Giga-MiniMc Instrukcja Obsługi Pobierz pdf (Strona 6)

Cascading Power

When installing multiple IE-Giga-MiniMc units on a DIN rail, connect to

one DC input source and then cascade from one

DC block to the next, until reaching the maximum

electrical current available.

DIN Rail Mounting

The IE-Giga-MiniMc ships from the factory with DIN clips, allowing installation on a

DIN rail. The IE-Giga-MiniMc mounts perpendicular to the DIN rail (as shown).

Use the supplied screws to attach the DIN clips to

the IE-Giga-MiniMc, then snap the converter to the

DIN rail.

To remove the converter from the DIN rail, use a

flat-head screwdriver in the slot to gently pry the

converter from the rail.

NOTE

The DIN clips are designed for use on a DIN-35 rail.

NOTE

When using stranded wire, the leads must be tinned, and equivalent to a 16 AWG solid

conductor.

The IE-Giga-MiniMc is protected against mis-wiring; if mis-wired the IE-Giga-

MiniMc will not function. The IE-Giga-MiniMc is internally connected to the negative DC

power terminals.

1 2 3 4 5 6 7 8 9 10 11 12

Brak uwag

IMC Networks IE-Giga-MiniMc Instrukcja Obsługi Strona 6