IMC Networks McBasic, TX/SSFX-MM1310-SC Instrukcja Obsługi Pobierz pdf (Strona 5)

Configuring McBasic TX/FX

McBasic TX/FX features an 8-position DIP Switch for

configuring the unit after installation. Access this

switch through a cut-out in the bottom of the unit.

After configuring the DIP Switch, power down the

unit and then power up again for the changes to

take effect. Default settings for the following

features are shown to the right.

Twisted Pair Crossover/Pass-Through Connections

Whether using crossover or straight-through CAT5 twisted pair cabling, McBasic

TX/FX will support both types of connections by one of the following methods:

AutoCross

Switch 4:

McBasic TX/FX includes AutoCross, a feature which automatically

selects between a crossover workstation or pass-through connection

depending on the connected device. To enable AutoCross, move the

Auto

MDI/MDI-X

switch to the ON position.

MDI/MDI-X

Switch 3:

To manually configure McBasic TX/FX for a pass-through (MDI) or a

crossover (

MDI-X

) connection, move the

Auto MDI/MDI-

X Switch 4

to OFF, then move Switch 3

to the desired connection type:

MDI=OFF and MDI-X=ON. If unsure of the type of connection, set

the DIP Switch to a position that makes the twisted pair LNK (link)

LED glow.

1 2 3 4 5 6 7 8 9 10 ... 15 16

Brak uwag

Models	Document Type
KSIL024H219	User Manual Klimaire KSIL024H219 User Manual, 16 pages
KSIL036-H215	User Manual Klimaire KSIL036-H215 User Manual, 16 pages

IMC Networks McBasic, TX/SSFX-MM1310-SC Instrukcja Obsługi Strona 5